Beijing glass filter kettle GK2007FT processing

by:Yestitan Filter Kettle     2021-01-04
After electrify indicator, but there was no hot water and sometimes filter electric kettle was found after the indicator light is lit, but no water in the heating, hot water bottle and no movement, this kind of situation mostly because the faults or electric heating tube link. Say filter kettle 'poison' than plastic, in addition to material factors, and the filter kettle for a long time not to clean, time grows, the filter kettle wall can produce a thick layer of scale, the scale of the elements is not pure, both materials such as calcium carbonate, and mixed long accumulation of heavy metals in tap water, bacteria, dirt, and other compounds. Glass filter kettle GK2007FT solution: open hot water switch box, look at the internal metal shrapnel deformation, with or without corrosion, and then make a decision whether to replace. Power connection joints connected with pot body should be reliable, elastic appropriate, flexible installation and see whether there is CCC standard line, parameter identification. Electric kettle products on the market at present there are a lot of, or a series of classification, according to material relative to the ordinary made of stainless steel or plastic electric kettle and become totally enclosed, users can be observed from external to internal, also can adjust in time, especially for some worry about the water in the kettle boil dry friends lead to security issues, to choose a suitable glass electric kettle is good advice. Glass filter GK2007FT heat pipes and kettle pot body interfaces should be installed and firm, good seal, no leakage phenomenon. Hand gently upon heaters are available, and check whether the assembly is strong, there should be no loose phenomenon, usually after water will still put 1 when I was a child, check whether the water phenomenon. Canteen is on the basis of folk vessels carrying water, in the use of electric kettle, must hold water, after electrify, avoid by all means to electricity, water, after fill in POTS should be at least the lowest water level, but not more than the highest water level regulation. An electric kettle boil with acid, alkali, salt composition, in order to avoid the pot body and heater, eroded. But also often remove the scale on the electric heater or other besmirch, otherwise it will affect the thermal efficiency of heater and service life. Glass filter kettle GK2007FT its prototype for the production of fur skins, after the evolution of clay, pottery, bronze ware. With the development of logistics equipment and to the attention of the people, canteens increasingly become an important part of individual equipment. The people's liberation army military kettle development up to now, there is no experience to the reform and development too much.
Custom message
Chat Online
Chat Online
Chat Online inputting...