After electrify indicator, but there was no hot water and sometimes filter electric kettle was found after the indicator light is lit, but no water in the heating, hot water bottle and no movement, this kind of situation mostly because the faults or electric heating tube link.
Electric kettle need not when, want to put in dry place, so as not to be affected with damp be affected with damp and reduce safety performance.
To plug, power cord carefully to conduct a comprehensive inspection;
If found to have damaged phenomenon, only to the manufacturer designated maintenance station to repair or replacement.
Electric kettle can be connected to the alternating current (ac) is used, and it USES the socket with the earth system, never to drag along its tip line, line pressing or let it hanging down.
Glass filter kettle GK2007TT solution: open hot water switch box, look at the internal metal shrapnel deformation, with or without corrosion, and then make a decision whether to replace.
Glass electric kettle using the latest thermostat structure, safe and durable.
Glass filter kettle is more reliable, look for the brand to buy that whether there is a kind of safe and reliable materials, to make electric kettle 'return to the right direction?
Experts say that the glass filter kettle is more safe and reliable, but not all are suitable for making glass filter kettle, the best should be high borosilicate glass.
Glass filter kettle GK2007TT it USES conductive ring is 360 degrees, arbitrary Angle put can electricity work, has the function of manual and automatic;
Use double micro pressure switch, silver contact when too little water in the kettle is lower than the lowest water level or when there is no water in your pot, kettle automatically power off, prevent dry;
You don't have to worry about whether have also cut off power supply.
Health, health become a trend of modern people pay more attention to.
An electric kettle is heated by heating chassis.
Electric welding chassis and bottom together.
Pot bottom side located in POTS, and heating the chassis and the conductive terminals are placed in a pot, inside and outside to bolt fastening, on liner in all electric heat pipe and the pot body between the implementation of synthetic sealing and leakage.
Although the o-ring seal has above 100 ℃ high temperature resistant performance.
Glass filter kettle GK2007TT so we will pay attention to the quality of water, no matter from water, treatment, heating mode more carefully to control.
Glass filter kettle has always been our heating products of choice, no one.