Beijing glass filter kettle GK2007TT manufacturers

by:Yestitan Filter Kettle     2021-01-03
After electrify indicator, but there was no hot water and sometimes filter electric kettle was found after the indicator light is lit, but no water in the heating, hot water bottle and no movement, this kind of situation mostly because the faults or electric heating tube link. Electric kettle need not when, want to put in dry place, so as not to be affected with damp be affected with damp and reduce safety performance. To plug, power cord carefully to conduct a comprehensive inspection; If found to have damaged phenomenon, only to the manufacturer designated maintenance station to repair or replacement. Electric kettle can be connected to the alternating current (ac) is used, and it USES the socket with the earth system, never to drag along its tip line, line pressing or let it hanging down. Glass filter kettle GK2007TT solution: open hot water switch box, look at the internal metal shrapnel deformation, with or without corrosion, and then make a decision whether to replace. Electric kettle can highlight the details of an electric kettle brand is good or bad, go to the scale of the method is simple, first of all, to the kitchen in the common white vinegar, add a little white vinegar into the filter kettle, and then filled with water, after boiling placed about half an hour or so, then use the brush to scrub, filter kettle wall scale can be easily removed. Glass filter kettle GK2007TT and, more can discern the stand or fall of electric kettle from the details, the details of the general electric kettle mainly include: electric kettle open way whether accord with their own habits; Electric kettle base is slippery; Hukou is scraping the hand; Spout design is reasonable, whether can spill water, generally these details can help you identify which brand of electric kettle is good! Glass pot body is resistant to high temperature boiling polymer glass, appear a visual, filter kettle 5 minutes after turning on the power supply, water vapor bimetallic strip deformation of steam heat element, switch contact up to disconnect the power supply. If the steam switch failure, in POTS of water would have been burned down, until the water is dry up, a sharp rise in the temperature of the heating element, located at the base of the heating plate has two bimetallic strip, because heat transfer temperature rise sharply, expansion deformation, disconnect the power supply. Glass filter kettle GK2007TT convenient consumers watch pot. Glass at the bottom of the pot body directly binding the hot plate, but also set up to protect components, to avoid overheating kettle and cause safety accidents.
Custom message
Chat Online
Chat Online
Chat Online inputting...