Changzhou glass filter kettle GK2007AT manufacturers

by:Yestitan Filter Kettle     2020-12-30
After electrify indicator, but there was no hot water and sometimes filter electric kettle was found after the indicator light is lit, but no water in the heating, hot water bottle and no movement, this kind of situation mostly because the faults or electric heating tube link. High borosilicate glass is a kind of low inflation, high temperature resistant, high strength, high hardness, high corrosion resistance, anti precipitation, light transmittance and stability of Gao Huaxue special glass material, thus is one of the best material for production of baby bottles. The expert points out, baby products of the various aspects of material requirements are higher, the indicators are requirements for food safety standard, if suitable for baby products production, this kind of material, in contrast, the performance, security, stability will be more suitable for human use. Glass filter kettle GK2007AT solution: open hot water switch box, look at the internal metal shrapnel deformation, with or without corrosion, and then make a decision whether to replace. Some still using silica gel firmly stick to the glass bottom of the pot body, electric kettle, when not in use should be put in dry place, so as not to be affected with damp be affected with damp and reduce safety performance. To plug, power cord carefully to conduct a comprehensive inspection; If found to have damaged phenomenon, only to the manufacturer designated maintenance station to repair or replacement. Electric kettle can be connected to the alternating current (ac) is used, and it USES the socket with the earth system, never to drag along its tip line, line pressing or let it hanging down. Glass filter GK2007AT kettle on the one hand, in order to more convenient to remove and replace the glass pot body, on the other hand can also achieve leakproof effect, high temperature resistant function, but also conform to the hygiene standards. Glass electric kettle using the latest coupler structure, safe and durable. An electric kettle is heated by heating chassis. Electric welding chassis and bottom together. Pot bottom side located in POTS, and heating the chassis and the conductive terminals are placed in a pot, inside and outside to bolt fastening, on liner in all electric heat pipe and the pot body between the implementation of synthetic sealing and leakage. Although the o-ring seal has above 100 ℃ high temperature resistant performance. Glass filter kettle GK2007AT it USES conductive ring is 360 degrees, can conduct electricity work is put at any Angle, has the function of manual and automatic; Use double micro pressure switch, silver contact when too little water in the kettle is lower than the lowest water level or when there is no water in your pot, kettle automatically power off, prevent dry; When you take the kettle.
Custom message
Chat Online
Chat Online
Chat Online inputting...