Food grade stainless steel general gloss good, smells without heavy metal rust.
When using electric kettle, must hold water, after electrify, avoid by all means to electricity, water, after fill in POTS should be at least the lowest water level, but not more than the highest water level regulation.
An electric kettle boil with acid, alkali, salt composition, in order to avoid the pot body and heater, eroded.
But also often remove the scale on the electric heater or other besmirch, otherwise it will affect the thermal efficiency of heater and service life.
Glass filter kettle GK1201DLB high heat-resistant borosilicate glass and the instantaneous temperature performance requirements, under the condition of temperature sudden change does not happen in an instant burst phenomenon, its in weight compared to contain a large amount of heavy metal ions' raw glass is much lighter, there are differences in appearance looks like common glass, the vision from the 'raw glass' feeling of hard and brittle.
Electric kettle can highlight the details of an electric kettle brand is good or bad, the filter working principle of the kettle, the water boils when the steam of steam heat element, bimetallic strip deformation, the deformation of power through the lever principle to push the power switch.
Its power is not reset, the kettle will not automatically when the power to heating.
Glass filter kettle GK1201DLB and, more can discern the stand or fall of electric kettle from the details, the details of the general electric kettle mainly include: electric kettle open way whether accord with their own habits;
Electric kettle base is slippery;
Hukou is scraping the hand;
Spout design is reasonable, whether can spill water, generally these details can help you identify which brand of electric kettle is good!
Glass pot body is resistant to high temperature boiling polymer glass, appear a visual, filter kettle 5 minutes after turning on the power supply, water vapor bimetallic strip deformation of steam heat element, switch contact up to disconnect the power supply.
If the steam switch failure, in POTS of water would have been burned down, until the water is dry up, a sharp rise in the temperature of the heating element, located at the base of the heating plate has two bimetallic strip, because heat transfer temperature rise sharply, expansion deformation, disconnect the power supply.
Glass filter kettle GK1201DLB convenient consumers watch pot.
Glass at the bottom of the pot body directly binding the hot plate, but also set up to protect components, to avoid overheating kettle and cause safety accidents.