Pot body adopts handblown, and the high borosilicate glass, in POTS heating plate for medical grade 316 stainless steel, compared to most of the 304 stainless steel material on the market, not only the heat stability, strong corrosion resistance.
Electric kettle products on the market at present there are a lot of, or a series of classification, according to material relative to the ordinary made of stainless steel or plastic electric kettle and become totally enclosed, users can be observed from external to internal, also can adjust in time, especially for some worry about the water in the kettle boil dry friends lead to security issues, to choose a suitable glass electric kettle is good advice.
Glass filter GK2008T even close contact with the tea kettle, also fear harmful substances precipitation, boil tea using double rest assured.
Glass electric kettle using the latest thermostat structure, safe and durable.
Electric kettle need not when, want to put in dry place, so as not to be affected with damp be affected with damp and reduce safety performance.
To plug, power cord carefully to conduct a comprehensive inspection;
If found to have damaged phenomenon, only to the manufacturer designated maintenance station to repair or replacement.
Electric kettle can be connected to the alternating current (ac) is used, and it USES the socket with the earth system, never to drag along its tip line, line pressing or let it hanging down.
Glass filter kettle GK2008T it USES conductive ring is 360 degrees, arbitrary Angle put can electricity work, has the function of manual and automatic;
Use double micro pressure switch, silver contact when too little water in the kettle is lower than the lowest water level or when there is no water in your pot, kettle automatically power off, prevent dry;
You don't have to worry about whether have also cut off power supply.
Glass pot body is resistant to high temperature boiling polymer glass, connect fully visible, when using electric kettle, must hold water, after electrify, avoid by all means to electricity, water, after fill in POTS should be at least the lowest water level, but not more than the highest water level regulation.
An electric kettle boil with acid, alkali, salt composition, in order to avoid the pot body and heater, eroded.
But also often remove the scale on the electric heater or other besmirch, otherwise it will affect the thermal efficiency of heater and service life.
Glass filter kettle GK2008T convenient consumers watch pot.
Glass at the bottom of the pot body directly binding the hot plate, but also set up to protect components, to avoid overheating kettle and cause safety accidents.