Overall, filter kettle pot body currently on the market there are two kinds of material: stainless steel, plastic, glass and ceramics.
The four kinds of material of electric kettle, when judging the quality, main is to look at whether there is a validation of the bar code related units.
Plastic or stainless steel shell is thicker and more smooth, bright and beautiful appearance quality of the products is relatively better.
If there was an obvious rough plastic parts, uneven phenomenon, shaking inside a voice, may be technology is bad, inferior quality of the products.
Another filter kettle is water injection using electric equipment, when the choose and buy should pay special attention to the sealing condition, to see whether there is water leakage phenomenon.
Glass filter kettle GK2006CT as big brand electric kettle are national certification mark.
At the same time, food grade PP material generally look texture smooth, bright and uniform texture, no plastic smell smell.
Power connection joints connected with pot body should be reliable, elastic appropriate, flexible installation and see whether there is CCC standard line, parameter identification.
Since electric kettle work in high temperature condition, using long, aprons still will lose elasticity, aging leads to outward in POTS of water leakage, causing an electric kettle bakelite sockets, short circuit, the pot body carbide metal melt blown fuse, insurance and other kinds of faults.
The user must carefully check prior to power after each injection bakelite sockets around the presence of pot of water leakage phenomenon.
Glass filter GK2006CT heat pipes and kettle pot body interfaces should be installed and firm, good seal, no leakage phenomenon.
Hand gently upon heaters are available, and check whether the assembly is strong, there should be no loose phenomenon, usually after water will still put 1 when I was a child, check whether the water phenomenon.
Vitreous electric kettle, kettle body fully visible, with environmental protection and energy saving, filter kettle 5 minutes after turning on the power supply, water vapor bimetallic strip deformation of steam heat element, switch contact up to disconnect the power supply.
If the steam switch failure, in POTS of water would have been burned down, until the water is dry up, a sharp rise in the temperature of the heating element, located at the base of the heating plate has two bimetallic strip, because heat transfer temperature rise sharply, expansion deformation, disconnect the power supply.
Glass filter kettle GK2006CT high thermal efficiency, no radiation, safe, reliable and easy to use, are boiled water essential to household appliances, it is also suitable for use in parties and tea ceremony, etc.