Overall, filter kettle pot body currently on the market there are two kinds of material: stainless steel, plastic, glass and ceramics.
The four kinds of material of electric kettle, when judging the quality, main is to look at whether there is a validation of the bar code related units.
Say filter kettle 'poison' than plastic, in addition to material factors, and the filter kettle for a long time not to clean, time grows, the filter kettle wall can produce a thick layer of scale, the scale of the elements is not pure, both materials such as calcium carbonate, and mixed long accumulation of heavy metals in tap water, bacteria, dirt, and other compounds.
Glass filter kettle GK2007FT as big brand electric kettle are national certification mark.
At the same time, food grade PP material generally look texture smooth, bright and uniform texture, no plastic smell smell.
Glass electric kettle is a household name, electric kettle, when not in use should be put in dry place, so as not to be affected with damp be affected with damp and reduce safety performance.
To plug, power cord carefully to conduct a comprehensive inspection;
If found to have damaged phenomenon, only to the manufacturer designated maintenance station to repair or replacement.
Electric kettle can be connected to the alternating current (ac) is used, and it USES the socket with the earth system, never to drag along its tip line, line pressing or let it hanging down.
Glass filter kettle GK2007FT glass is clean and preserve one's health is known to all, is it convenient to use and high safety performance and accept consumer favour.
Now exquisite glass electric kettle is not only practical, but also appearance has to let the consumer feast for the eyes, constantly create new visual can promote the market sales.
Glass pot body is resistant to high temperature boiling polymer glass, appear a visual, electric kettle is heated by heating chassis.
Electric welding chassis and bottom together.
Pot bottom side located in POTS, and heating the chassis and the conductive terminals are placed in a pot, inside and outside to bolt fastening, on liner in all electric heat pipe and the pot body between the implementation of synthetic sealing and leakage.
Although the o-ring seal has above 100 ℃ high temperature resistant performance.
Glass filter kettle GK2007FT convenient consumers watch pot.
Glass at the bottom of the pot body directly binding the hot plate, but also set up to protect components, to avoid overheating kettle and cause safety accidents.