Shanghai in glass processing

by:Yestitan Filter Kettle     2021-01-04
Food grade stainless steel general gloss good, smells without heavy metal rust. Electric kettle of practical value is mainly manifested in the heating speed, 5 - generally burn a pot of water 8 minutes, filter kettle can say a energy saving energy saving rapid heating appliances. And easy to use, the water is boiling automatic power, ensure the use of security. Suggest use full stainless steel filter kettle quickly, in a common family, so that you can avoid plastic kettle used on security issues. Glass in high heat-resistant borosilicate glass and the instantaneous temperature performance requirements, under the condition of temperature sudden change does not happen in an instant burst phenomenon, its in weight compared to contain a large amount of heavy metal ions' raw glass is much lighter, there are differences in appearance looks like common glass, the vision from the 'raw glass' feeling of hard and brittle. Glass electric kettle is a household name, electric kettle, when not in use should be put in dry place, so as not to be affected with damp be affected with damp and reduce safety performance. To plug, power cord carefully to conduct a comprehensive inspection; If found to have damaged phenomenon, only to the manufacturer designated maintenance station to repair or replacement. Electric kettle can be connected to the alternating current (ac) is used, and it USES the socket with the earth system, never to drag along its tip line, line pressing or let it hanging down. Glass in glass is clean and preserve one's health is known to all, is it convenient to use and high safety performance and accept consumer favour. Now exquisite glass electric kettle is not only practical, but also appearance has to let the consumer feast for the eyes, constantly create new visual can promote the market sales. Some still using silicone gasket and seal tightly stick to the glass bottom of the pot body, an electric kettle is heated by heating chassis. Electric welding chassis and bottom together. Pot bottom side located in POTS, and heating the chassis and the conductive terminals are placed in a pot, inside and outside to bolt fastening, on liner in all electric heat pipe and the pot body between the implementation of synthetic sealing and leakage. Although the o-ring seal has above 100 ℃ high temperature resistant performance. Glass in my hand is in order to more convenient to remove and replace the glass pot body, on the other hand can also achieve leakproof effect, high temperature resistant effect, but also conform to the hygiene standards.
Custom message
Chat Online
Chat Online
Chat Online inputting...