Filter used in the thermostat kettle on market basically has two kinds of imported and domestic.
When using electric kettle, must hold water, after electrify, avoid by all means to electricity, water, after fill in POTS should be at least the lowest water level, but not more than the highest water level regulation.
An electric kettle boil with acid, alkali, salt composition, in order to avoid the pot body and heater, eroded.
But also often remove the scale on the electric heater or other besmirch, otherwise it will affect the thermal efficiency of heater and service life.
Glass filter kettle GK2007CT import thermostat mainly Otter and Strix two brands, the two brands are from the UK.
The Otter thermostat is the earliest start manufacture thermostats brand home appliances, mainly used for filter kettle of high-end brands, can provide six heavy security protection.
Power connection joints connected with pot body should be reliable, elastic appropriate, flexible installation and see whether there is CCC standard line, parameter identification.
To scale method is simple, first of all, to the kitchen in the common white vinegar, add a little white vinegar into the filter kettle, and then filled with water, after boiling placed about half an hour or so, then use the brush to scrub, filter kettle wall scale can be easily removed.
Glass filter GK2007CT heat pipes and kettle pot body interfaces should be installed and firm, good seal, no leakage phenomenon.
Hand gently upon heaters are available, and check whether the assembly is strong, there should be no loose phenomenon, usually after water will still put 1 when I was a child, check whether the water phenomenon.
We usually use the kettle will precipitate a long period of time some scale in the bottom of the kettle, because the problem of water quality, especially the hot kettle of boiling water express, the more the kettle bottom sediment dirt.
An electric kettle is heated by heating chassis.
Electric welding chassis and bottom together.
Pot bottom side located in POTS, and heating the chassis and the conductive terminals are placed in a pot, inside and outside to bolt fastening, on liner in all electric heat pipe and the pot body between the implementation of synthetic sealing and leakage.
Although the o-ring seal has above 100 ℃ high temperature resistant performance.
Glass filter kettle GK2007CT we all know that scale is very difficult to remove, because sediment contains calcium carbonate and other chemical substances, and some chemical elements in the water, if the kettle of sediment accumulation is overmuch, time grows, will seriously affect the family's health.