Food grade stainless steel general gloss good, smells without heavy metal rust.
Electric kettle of practical value is mainly manifested in the heating speed, 5 - generally burn a pot of water
8 minutes, filter kettle can say a energy saving energy saving rapid heating appliances.
And easy to use, the water is boiling automatic power, ensure the use of security.
Suggest use full stainless steel filter kettle quickly, in a common family, so that you can avoid plastic kettle used on security issues.
Glass filter kettle TM2007CTT high heat-resistant borosilicate glass and the instantaneous temperature performance requirements, under the condition of temperature sudden change does not happen in an instant burst phenomenon, its in weight compared to contain a large amount of heavy metal ions' raw glass is much lighter, there are differences in appearance looks like common glass, the vision from the 'raw glass' feeling of hard and brittle.
Power connection joints connected with pot body should be reliable, elastic appropriate, flexible installation and see whether there is CCC standard line, parameter identification.
An electric kettle is heated by heating chassis.
Electric welding chassis and bottom together.
Pot bottom side located in POTS, and heating the chassis and the conductive terminals are placed in a pot, inside and outside to bolt fastening, on liner in all electric heat pipe and the pot body between the implementation of synthetic sealing and leakage.
Although the o-ring seal has above 100 ℃ high temperature resistant performance.
Glass filter TM2007CTT heat pipes and kettle pot body interfaces should be installed and firm, good seal, no leakage phenomenon.
Hand gently upon heaters are available, and check whether the assembly is strong, there should be no loose phenomenon, usually after water will still put 1 when I was a child, check whether the water phenomenon.
Some still using silicone gasket and seal tightly stick to the glass bottom of the pot body, in the use of electric kettle, must hold water, after electrify, avoid by all means to electricity, water, after fill in POTS should be at least the lowest water level, but not more than the highest water level regulation.
An electric kettle boil with acid, alkali, salt composition, in order to avoid the pot body and heater, eroded.
But also often remove the scale on the electric heater or other besmirch, otherwise it will affect the thermal efficiency of heater and service life.
Glass filter TM2007CTT kettle on the one hand, in order to more convenient to remove and replace the glass pot body, on the other hand can also achieve leakproof effect, high temperature resistant function, but also conform to the hygiene standards.